Question: What DB Should 808 Be?

How can I make my 808 sound better?

Here’s how:Add a compressor to the 808.Route the kick into its sidechain input.Set the attack to its fastest value, so that every time the kick hits, the 808 turns down momentarily.

This will shave the transient off the 808.Adjust the release until the 808 returns naturally to full volume after the kick hits..

Should you pan hi hats?

By panning hi-hats to the sides, everything that’s left in the center will get more attention, simultaneously making the mix feel wider and more rhythmic. For hip-hop and electronic tracks, I like to pan hats 30–50% away from the center.

What dB should kick be at?

yes -6 is a good starting point or -10 is fine also. if its not loud enough turn up your speakers. everything should sound fine if you mix around and based on the kick. always stay under 0db, if you go over bring everything down or just drop the master fader a few db.

Is 808 a kick or bass?

808s are like the low end(bass) of a kick, that is why they are short. A bassline can be made with long notes and doesnt have to go with the rhythm of the kick.

Why do they call it 808?

If you’re into hip-hop and pop, you’ve probably heard “808” at some point. That’s a reference to the iconic Roland TR-808, a drum machine created by Ikutaro Kakehashi in 1980. … The machine particularly stood out for its powerful bass drum sound.

Should Kick be louder than snare?

The snare is the foundation of the backbeat, and typically one of the loudest elements in the mix. Next, bring the kick fader up until it sounds almost as loud as the snare. It should be loud enough that the low frequencies are rich and powerful, but not so loud that it masks the bottom-end of the snare drum.

How loud should your mix be?

I recommend mixing at -23 dB LUFS, or having your peaks be between -18dB and -3dB. This will allow the mastering engineer the opportunity to process your song, without having to resort to turning it down.

What does 808 mean sexually?

The 808 is a drum machine originally made by Roland. It really just means checking in post-sex, and if anything did happen that one or all parties felt weird about, making sure it doesn’t happen the next … 808 is an abbreviation that stands for “Police code for disturbing the peace†.

How do you EQ 808 bass?

Try applying the distortion directly to the 808 track, or apply it to a high-passed parallel track so that the low frequencies are clean. With a parallel track, you can add a layer of mid- and high-frequency overtones to the sound to taste. Now the tone of your 808 will come through more clearly over smaller speakers.

Is an 808 a kick?

The “808 kick sound” means more than just “the kick produced by an 808”, it now usually refers to any kick built using a fast frequency swipe.

Does FL Studio have 808?

808 Slides Slides can be accomplished in FL Studio by adding a portamento note to a native FL Studio instrument in the Piano Roll. They can also be added to 3rd party VSTS by adjusting Pitch Control knobs, located either in the channel settings window or parameters window.

How do you get a spinz 808 to hit hard?

So like if you have a sample or you’re playing notes through piano roll, put an EQ on that channel it and just cut the low ends until your 808 hits harder.

Should you compress 808s?

Sidechain compression and multiband compression will play a big role. A C6 multiband compressor can help you dip a frequency in your 808 to make room for the kick. In some cases, just rolling off the low end on the kick at around 80 Hz with a Q10 or an eMo Q4 can leave plenty of room for your 808 to sound big.

What dB is best for bass?

In its current incarnation, 1 minute average sound levels at the mix console are required to remain under 105 dBA and 123 dB for 25-80 Hz bass.

Should I sidechain kick and 808?

An ideal mix will have the kick transient hit first, and then the 808 bass fades in. However, blending the two should sound like one seamless bass sound. … The kick should cut through, while still having a seamless blend. This method is often better than using sidechain compression.

Why do my hi hats sound bad?

If you push too hard on your hi hat foot pedal, you will choke the cymbals – and this is a sure way to make even the best cymbals sound average. … Combined, they give you a classic hi hat sound. Crash cymbals should be struck in a sideways or “glancing” blow, rather than directly down.

How loud should hi hats be in a mix?

20 dbThe thing you want to create is a “nice even sound” as when your song gets mastered the low and top end will become much louder and much more defined than before. If you absolutely must have a volume level for your hi hats, I would suggest -20 db.